Aggregate Delivery for Contractors

A contractor order runs on timing. Have the material, the quantity, the drop spot, and the schedule ready before you call, and the loads land in the order your crew needs them.

By the Earthstone Materials Team  ·  Published November 8, 2026  ·  Last updated: November 8, 2026

A contractor order runs on timing. Have the material, the quantity, the drop spot, and the schedule ready before you call, and the loads land in the order your crew needs them. Base stone first, then the surface layer, with each load staged where the crew can reach it without blocking the work. This guide covers what to have ready, how to phase a multi-load job, and how repeat ordering works.

What to have ready when you call

Have five things ready before you call (561) 489-4948. First, the material by name: FDOT limerock base, crusher run, #57 stone, or whichever material the job calls for. Second, the quantity in cubic yards, with the depth and the area it covers. Third, the site address and the drop spot. Fourth, access notes: gate codes, narrow entrances, soft ground, and overhead wires. Fifth, a contact on site who can point the driver to the drop spot.

If the quantity is not final yet, bring the measurements and let us work the yardage with you. Length times width times depth in feet, divided by 27, gives cubic yards, and base materials need about 20 percent extra for compaction. Our material calculator runs the same math, and the material selector helps when a job could take more than one material.

Tell us the schedule, not just the quantity. A job that needs four loads over two days is planned differently from a job that needs four loads at once.

Multi-load scheduling and phased deliveries

Phase deliveries in the order the crew works. Base material goes first so it can be spread and compacted before the surface layer arrives. Surface stone, topsoil, or finish material comes last, when the crew is ready to place it. Sending the finish material first leaves it sitting in the way while the base is still being worked.

For a large job, split the total into loads that match the day's work.

Order the full base quantity up front when the job needs matching material across sections. Material from one source keeps the color and the compaction behavior consistent from one section to the next, which matters on driveways, pads, and road base where the crew works in stages. For the basics of a delivery day, see our what to expect on gravel delivery day guide.

Staging and site access

Pick the drop spot before the truck arrives. It needs firm ground that can hold a loaded truck, clear overhead space, and room for the truck to get in and out without reversing across soft ground. Mark the spot with cones, stakes, or paint so the driver can see it on arrival, and keep the route to it clear of equipment, pallets, and parked vehicles.

After heavy rain, check the ground before the truck rolls in. Soft or saturated ground can trap a loaded truck, and a stuck truck costs the crew more time than a rescheduled load. Have a backup spot ready and tell us when you order so the driver plans for it.

Gated sites and HOA communities need extra planning. Share gate codes, delivery hours, and any truck restrictions when you order, and have the site contact ready to meet the driver at the gate. Our HOA and gated community delivery guide covers gate codes, hours, and staging rules in more detail.

Contractor accounts and repeat ordering

Repeat work goes faster when we already know your jobs. A contractor account keeps your usual materials, delivery areas, and site contacts on file, so a repeat order starts from what we already know instead of from scratch.

Consistency is the other reason to keep ordering through one supplier. The same material from the same source behaves the same way under the compactor and under traffic, which keeps your crew from relearning a new pile on every job.

Our contractors page and our commercial contractor supply service cover the full picture for job site supply across South Florida. When you are ready to book the first load, a fast quote gets the schedule started.

Worked example: phasing a 48 cubic yard job

Take a job that needs 48 cubic yards of base material in total. A standard full load is about 12 cubic yards, so the job takes four loads. If the crew can spread and compact about one load a day, schedule one load each morning for four days, in the order the crew will work the site.

That schedule keeps one fresh pile on site at a time, keeps the rest of the site clear for equipment, and keeps the crew from running out of material mid-day. The minimum delivery is four cubic yards, so smaller top-up loads are available if the last section needs a little extra to finish.

Frequently asked questions

The material name, the quantity in cubic yards, the site address, the drop spot, access notes like gate codes and soft ground, the schedule, and a contact on site. With those details we can plan the loads, the truck, and the order they arrive in.
Yes. Tell us the total quantity and the order the crew needs it in, and we will schedule loads to match the work. Base material goes first so it can be spread and compacted, with surface and finish material last.
Pick one drop spot per load before the truck arrives, mark it clearly, and keep the route to it clear. If the site is tight, we can discuss a smaller load, a nearby staging point, or a street drop where the street allows.
Yes. Share the gate procedure, delivery hours, and any truck restrictions when you order, and have the site contact ready at the gate. Check the community delivery hours before requesting a weekend drop, since many communities do not allow weekend vendor access.
The minimum delivery is four cubic yards per load. Same-day delivery is available on in-stock materials when you call or text (561) 489-4948 before 4:00 PM Eastern, and larger jobs are scheduled across as many loads as the work needs.

Ready when you are.

Tell us the material, quantity, and drop location. We'll handle the rest.

Get a fast quoteCall now
Call (561) 489-4948Get a quote